Do you want to understand how is drilling porcelain tiles done? This post will assist you by providing simple steps that are extremely important for your drilling activity.

Drilling porcelain tiles would be needed should you want to put up extra accessories in your bathroom or virtually any room that’s got porcelain tiles.

For example, by drilling the porcelain tiles, you’d be able to put bathroom shaving cabinet, a mirror, soap dish, towel rails, or maybe your skin care products holder.

To begin your drilling activity, you have to first figure out what kind of resources you’ll require to carry out the work. Listed below are the tools you need:

RCD Breaker
Drill Bits of Diamond Core (Good Quality)
Masonry Drill Bits (Included w/ quality drill bits)
Drill Bit of Carbide Pilot ( this can be used if you’ll drill 13-mm hole or larger holes)
Equipment for Water Cooling
Drilling Device
Safety Glasses or Goggles

These materials can be bought in various stores. You can just simply purchase these before proceeding with your drilling activity. You should make sure of the grade of the instruments first so that the result of the drilling would be suitable for your need.

One other thing you must take into account with drilling porcelain tiles is the hole sizes you are about to create. This is fairly important for the size or diameter of the hole determines how big the drill bit you’re going to use.

After selecting the diameter of the holes you are about to drill and setting up the equipments you will need for the drilling, you can begin to proceed drilling your porcelain tiles. Be sure to don your safety goggles to keep your eye free from particles not to mention prevention of electric shock with RCD.

These proceeding steps will be for holes about 10mm or less in diameter with diamond cores.

1. Put an indication at the hole’s center. Either you employ a sticky tape or simply a lead pencil.
2. Grab the appropriate size of the diamond core bit.

Then, affix it to the electric drill. Make sure that there’s a supply of water from any cooling equipment is at a constant. (Water cooling equipment is essential in keeping it sure that there is a constant cool temperature in the diamond core bit and this will prevent debris while you are drilling the hole.

Avoid using portable aspirator or wet sponge, for these never give adequate coolant to the diamond core bit.)

3. Your drill needs to be positioned between 1000 & 1500 rpm. Choosing the marker as the marking tool, it’s suitable to apply the “Leaning In” method.

*Method of Leaning In- With an angle, you will start to drill. When you see the drill cuts the tile, your drill should be in horizontal position. Ensure there’s adequate pressure laid and turn the drill till the hole is completely drilled.

*Method using Sticky tape- Place sticky tape on the wall exactly where you need the hole. It will aid to stop the drill bit from slipping.

4. Tip- I took an excellent tip from As soon as the hole has started, don’t use a lot of pressure let the drill do the work

You might also like...