As there is no real difference between ceramic and porcelain tiles, the term “vitrified” added to the name implies something distinct.

Vitrified indicates that the product is glass like, actually all ceramics are vitrified (glass like) to some extent, therefore it isn’t truly an accurate explanation.

Fully Vitrified or porcelain tiles will have a water absorption rate of less than 0.5 percent. That means a very low water absorption and thus wouldn’t essentially be glazed.

Tiles with higher water absorption rates (greater than six percent) are at times called “Vitrified” when actually they aren’t .

Porcelain tiles are very renowned, especially over the last decade or more. They could be polished or textured with spectacular glazed finishes.

Porcelain tiles are produced with a blend of kaolin clays, quartz, and feldspar, then heated at 1200-1300 degrees, forming uniform and compact tiles.

Previously, porcelain tiles were typically used in industrial applications for their strength, low porosity, and high abrasion resistance. Nowadays, due to new strategies and lower production costs, porcelain tiles can be found in our homes, in living-rooms, bathrooms, and kitchens worldwide.

Unglazed vitrified porcelain are tiles that do not get a glaze added onto the surface. On the other hand it’s the natural state of the clays and additives that makes up the colour of the tile. One of the benefits of a vitrified porcelain tile is, whenever it does get cracked, the colour runs throughout the body of the tile.

Furthermore, due to the durability, a porcelain tile can be machined to generate a polished surface, a matt texture, or perhaps a rough outer surface. Vitrified porcelain tiles can be made with cut edges (rectified), to ensure that every tile is exactly the same size.

Vitrified porcelain tiles are an exceptional product, and compete efficiently with natural stones such as marbles and granites.

Be aware though, mechanically enhancing the surface of natural porcelain to a polished finish, or a matt finish, opens up tiny micro pores on top of the tile. It’s because of this that most tile manufacturers and retailers recommend that porcelain tiles be sealed – a procedure that seals these tiny pores.

Vitrified tiles may accommodate a “full body” tile, which means that the design and style is not only on the outside of the tile, but runs throughout the entire body. The advantage of this is that the tiles turn out to be exceptionally tough and stain resistant.
Tiles could be laid with easily available tile plastic spacers, thereby achieving a uniform joint.
Vitrified porcelain tiles are economical and recommended for your home or business.


You might also like...