Since it could be intimidating that you make some mistakes in the process of tiling, many people would rather not learn how to do it. Contrary to what many think, tiling is really easy to do. Instead of getting a pro for the job, it can save you a whole lot of money. If you know the do’s and don’ts, then this task is a no-brainer for you.

Picking Your Tiles

You must pick the tiles you want to use before doing anything else. The selection of choices you have may get you shocked. Tiles may come in various sizes, colors, textures and finishes.

Depending on your choice, picking a tile needs a good information on them. It can also depend on how you want the room to be and the over-all design and feel of the room.

Calculations and Dimensions

You also have to measure your floor area. Whether you would like the tiles to go under any type of fitting and units is also very important to consider. So that whenever you will have to move appliances in the future like a fridge you do not have to lift it up over the edge of your new tiles, it is better if you tile under the fittings.

You need to do some calculations when you have chosen what type of tile you want to use. You need to get your floor’s width and divide it by the width of one tile. You do that to discover the number of rows that you will have. Also, this can help you choose the optimal wall edge to put your cut tiles against.

Application

You can now begin applying tiles on your floor after doing the math. Making sure that you have an even coverage of glue placed on your sub-floor is also extremely important. Your sub-floor or the surface you’re tiling also is a factor in which adhesive to use. If it’s a concrete floor, then you can use a rapid setting adhesive. Nonetheless, be sure that you do not spread too much of the mixture simultaneously, as it can set as quickly as 30 minutes.

If it is a wooden sub-floor, you’ll need a flexible type of adhesive. You know if an adhesive is flexible if it is written on the bag or the tub. You need a white adhesive if you have marble. This is so that no color coming from the underside would bleed and ruin your design.

Grouting

You would have to grout the floor once you finished fixing your tiles on the floor and after you have allowed plenty of time for it to dry. You should seal first before you can grout them when you have natural tiles, like marble, slate, limestone, granite, travertine, and porcelain. So that they will be waterproof and can become more resistant against dirt and staining ,you have to use a specialized impregnating sealer.

Apply the groute using a grout squeegee after mixing it up. Until they are all filled, work over the joints.

Wipe off the excess grout utilizing a sponge or cloth to finish it.

You might also like...